Merging is completed. 4. Click the Close button. 5. Push the changes (entry of program) in the branch of Machine A from the local repository to the remote repository. For the procedure to push the project data to the remote repository, refer to 6.4.3 Registering the Changes to the Remote Repository (Push). 7.4.3.5 Create a branch for Machine B in the local repository and push it to the remote repository (No.5: Machine B development) Here, create a branch ProductB from the master , and then push the changes to the remote repository. For details on the series of procedure, refer to 7.4.3.2 Create a branch for Machine A in the local repository and push it to the remote repository (No.2:
Machine A development) . In the “TortoiseGit” Create Branch dialog box, configure the settings as follows. Create the ProductB branch in the local repository and then push this change to the remote repository. After Push operation, the “TortoiseGit” Log Messages dialog box is displayed as shown below. 108 Sysmac Studio Project Version Control Function Startup Guide (P125)