4 SCOPE OF THE VERSION CONTROL The version control function is applicable to devices that are registered in the project, as well as the following data of each device. • Data in Configurations and Setup and lower-level folders in the Multiview Explorer • Depending on the device, however, there is other version-controlled data in addition to the above, or some of the above data is not version-controlled. Refer to the Sysmac Studio Project Version Control Function Operation Manual (Cat. No. W589) for information on devices with relevant data. Note that display settings for windows, such as the layout of each pane in the main window, are not version- controlled.
The function is applicable to Controller unit version 1.16 or later. With the Unit of unit version 1.15 or earlier, version control function cannot be used. Sysmac Studio Project Version Control Function Startup Guide (P125) 11