Connecting 9.2 Connecting terminal blocks Requirements for spring-loaded terminals ● Auxiliary conductor terminals: Flat-head screwdriver with (3.0 x 0.5 mm) blade (DIN ISO 2380-1A) ● Main conductor terminals: Flat-head screwdriver with (3.5 x 0.5 mm) blade (8WA2 803) Procedure for spring-loaded terminal block SIRIUS 3RA6 Compact Starter 74 System Manual, 02/2008, GWA 4NEB 560 0601-02 DS 02 Step Instructions Image 1 To open the clamping springs of the spring-loaded terminal, insert the flat-head screwdriver into the square opening as far as it will go. Please observe a 10° horizontal angular deviation of the screwdriver to the oval opening.
1 3 2 2 Insert the cable as far as it will go into the oval opening and hold it in place. 3 Remove the screwdriver and pull on the cable to ensure it is completely secure.