Accessories 12.3 SIRIUS infeed system for 3RA6 12.3 SIRIUS infeed system for 3RA6 12.3.1 Description of the hardware Features The SIRIUS infeed system for 3RA6 is a pre-wired infeed system for the compact starter. The infeed system for 3RA6 is characterized by the permanent wiring of the main circuit, the PE infeed and PE tap. Compact starters can be removed from the infeed system and reinstalled without having to go to all the trouble of disconnecting and reconnecting the wiring. Configuration The infeed system for 3RA6 offers 3 supply possibilities. The following table presents these 3 supply possibilities and lists the short designations used to refer to them in this section.
Table 12-3 Short designations for the infeed system for 3RA6 Note Short designations For clarity's sake, this manual employs the short designations for the various infeed types that are associated with the infeed system for 3RA6. For a list of all the abbreviations used in the manual, please refer to the appendix "List of abbreviations (Page 174)". Thanks to the modular design, the infeed blocks can be extended to a total maximum width of 1.20 m using extension modules. For this purpose, the infeed blocks and extension modules are arranged side by side and connected up electrically using an extension connector and an optional PE extension connector.
SIRIUS 3RA6 Compact Starter System Manual, 02/2008, GWA 4NEB 560 0601-02 DS 02 95 Infeed Order number Short designation Left infeed, 50/70 mm2 screw terminal with three slots, outgoing terminal with screw-type or spring-loaded connection technology, incl. PE bar 3RA6813-8AB 3RA6813-8AC Screw-type infeed (50/70 mm2) Left infeed, 25/35 mm2 screw terminal with three slots, outgoing terminal with screw-type or spring-loaded connection technology, incl. PE bar 3RA6812-8AB 3RA6812-8AC Screw-type infeed (25/35 mm2) Left or right infeed, 25/35 mm2, with spring-loaded connection technology 3RA6830-5AC Spring-loaded infeed