MIL-STD 1808A (USAF) 1. SCOPE. 1.1 Scope. This standard sets forth requirements for the system, subsystem, and sub-subsystem numbering requirements for engineering drawings, technical manual, and other acquisition and logistics support requirements for aircraft, missile and space systems, engines, and ground communication-electronic equipment. Additionally, it may be used for supportability analysis, configuration management, maintenance data collection, or where ever a consistent maintainability related reference numbering requirement exists across a weapon system. 1.2 Acquisition applicability.
This standard shall be used by all Air Force acquiring activities and their respective contractors during the development and acquisition of weapon systems and equipment. 2. APPLICABLE DOCUMENTS. 2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3, 4, and 5 of this standard, whether or not they are listed.
2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS DEPARTMENT OF DEFENSE MIL-PRF-9854 - Technical Manuals:
Structural Repair (Aircraft) MIL-PRF-38807 - Technical Manuals - Illustrated Parts Breakdown, Preparation of MIL-PRF-83495 - Technical Manuals - On Equipment Maintenance Manual Set MIL-PRF-87268 - Manuals, Interactive Electronic Technical - General Content, Style, Format, and User-interaction Requirements STANDARDS DEPARTMENT OF DEFENSE DOD-STD-863 - Wiring Data and System Schematic Diagrams Preparation of (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 1 Downloaded from https://www.everyspec.com