• 3.1.2 Establish Wireless Connection You must make sure that your diagnostic tool is well connected with T-Ninja Box, and follow steps below to check wireless connection: Note: It is strongly recommended to connect the diagnostic tool with the 1. Slide down the status bar from the top. 2. Tap , go to Wireless and network -> Bluetooth . 3. Select the T-Ninja Box to be connected, wait until the connection is successful. • 3.1.3 Perform Common Operations You should enter the function interface before using the programmer. 1. Turn on a TOPDON diagnostic tool, and/or open the diagnostic App on the home screen. 2.
On the main diagnostic screen, enter Anti-theft system either from Local Diagnose or Reset , tap OK. 3. You will view the connection diagram, tap OK. www.topdon.com 8 Engine/ Gearbox programming Main diagnostic cable Connect with TOPDON VCI connector for data transmission Connect to power supply cable Connect with T-Ninja Box