3.1.3 Turn the ignition to the "ON" position (see Figure 3-3) If your vehicle is equipped with a keyless start system and the ignition switch is an "Engine Start Stop" button (see Figure 3-4), press the "Engine Start Stop" button until the car is in "ON" mode. Do not apply the brake while pressing the "Engine Start Stop" button, or you will start the engine instead of putting it in the "ON" position. The method of ignition varies by vehicle model. Refer to the vehicle's service manual for details. ENGINE START STOP Figure 3-3 Figure 3-4 3.1.4 Bind the VCI ① Go to User Info > VCI Management .
Tap the icon at the top right corner of the screen, and the device will ask you to connect the Bluetooth first. ② Connect the Bluetooth as prompted. Then the serial number and activation code will be automatically obtained. 15