Chapter 4: Operation Figure 4-21. Error Screen In order for these errors to be displayed, the Pendant Msgs must be Enabled, from the System Maintenance screen. NOTE: If the pendant ever loses contact with the controller, the pendant will dis- play the Connection Lost screen. From this screen, you will be prompted to recon- nect with the controller. This message is not affected by the Pendant Msgs setting. You can display a list of errors that have occurred since the pendant was last powered up. For details, see Displaying Recent Errors on page 43. T20 Pendant User's Guide, 10433-000 Rev. E Page 38 of 50