Chapter 3: Installation and Setup This chapter covers the installation and setup of the T20 pendant. 3.1 Transport and Storage The T20 pendant must be shipped and stored in a temperature-controlled environment, within the range –25° to +60° C (-13° to 140° F). The recommended humidity range is 5 to 95 percent, non-condensing. It should be shipped and stored in the original packaging, which is designed to prevent damage from normal shock and vibration. You should protect the packaging from excessive shock and vibration. The pendant must always be stored and shipped in a clean, dry area that is free from condensation. The T20 pendant weighs 480 g (1.1 lb) without the adapter cable installed.
3.2 Unpacking the Pendant Carefully inspect the shipping packages for evidence of damage during transit. If any damage is indicated, request that the carrier’s agent be present at the time the container is unpacked. Before signing the carrier’s delivery sheet, compare the actual items received (not just the pack- ing slip) with your equipment purchase order. Verify that all items are present and that the shipment is correct and free of visible damage. l If the items received do not match the packing slip, or are damaged, do not sign the receipt. Contact Omron Adept Technologies, Inc. as soon as possible.
l If the items received do not match your order, please contact Omron Adept Tech- nologies, Inc. immediately. l Retain all containers and packaging materials. These items may be necessary to settle claims. Remove the pendant from its box and place it on its back on a flat surface. 3.3 Repacking for Shipment If the pendant or other equipment needs to be shipped, reverse the steps in the installation pro- cedures in this chapter. Reuse all original packing containers and materials and follow all safety notes used for installation. Improper packaging for shipment will void your warranty. T20 Pendant User's Guide, 10433-000 Rev. E Page 9 of 50