Reference channel EN 8 Reference channel Save reference waveform Click Utility > Save > Ref wave , then select reference data sources CH1~CH4. Click the save icon below to open the Reference waveform menu, you can see the reference waveform saved just now. If a USB flash drive is inserted, then the reference waveform will be saved to the USB flash drive. It is also necessary to plug in the USB disk to call the reference waveform in the USB disk. Reference waveform calling and closing This series of oscilloscopes support calling reference waveform. On the oscilloscope interface, click Next > Reference waveform .
If the reference waveform has been saved before, open the reference waveform menu and the reference waveform file will be displayed. Click to select a reference waveform file, and a pop-up box will prompt: Call out successfully. A gray reference waveform will appear on the screen. Click the yellow bar , it will turn gray, indicating the reference waveform is closed. Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual 35