Light controls Turn the main light knob to the clear ance light position JOOJ to turn on the position light and the license plate Automatic light control can only as sist the driver. At all times, the driver should be responsible for the lighting of the vehicle. light. A CAUTION Turn the main light knob to the OFF position to turn off all vehicle lights. Do not use the position light instead of the low beam headlight when driv Operation Fog light switch ing. Otherwise, there is a risk of an ac cident. The position lights are not bright enough to illuminate the road in front of your vehicle or allow other vehicles and pedestrians to see your vehicle.
Therefore, turn on the low beam head light when it's dark or visibility is poor. Turn the main light knob to the low beam headlight position ID to turn on the low beam headlight and keep the position light and the license plate D9AA17A1B508 When the clearance lights (position light, license plate light) go on, turn the fog light knob to the front fog light po sition W to turn on the front fog light. Turn main light knob to the AUTO po sition. The clearance lights and low light on.
When the low beam headlight or the front fog light goes on, turn the fog light knob to the rear fog light position beam headlight will be turned on or off automatically according to the brightness of the surrounding environ ment. Of repeatedly to turn on or off the rear fog light. When released, the knob will automatically return. A CAUTION When visibility is affected in the day due to heavy fog, the lights may not light up automatically. Turn on the lights manually in this case. 50