Bluetooth Charging Mode 1. Once you've confirmed the preparation steps are done, plug the adapter into a wall outlet and attach the clamps to the battery terminals. 2. Open the TB6000Pro, tap Smart Charging/Quick Charging. Smart Charging: Under this mode, battery test is automatically performed before and after charging. Simply enter basic battery information and select the desired charging mode, then tap Start charging. A charging report will be automatically generated during the process. Note: 1. Smart Charging is only applicable to 12V lead-acid batteries (Li-ion or 6V batteries are not supported). 2.
To ensure accuracy of test results, only use the battery clamps to connect to the battery terminals under Smart Charging mode. Quick Charging: Under this mode, 6 charging modes are available, as well as Manual Mode. You can choose the preset charging mode to charge directly, or customize the charging mode according to the condition of the battery. 3. Follow the on-screen instructions on the app to complete the battery charging process. 17