Section 3 Using TC004 in Standalone Mode While in standalone mode, the TC004 thermal imaging camera can work independently on its own. To learn more about the operation of each button and port on the TC004 device, you can refer to Section 2 Product Overview . Section 4 Using TC004 in USB Mode Apart from standalone use, your TC004 can also work with a Windows-based computer. This section illustrates how to configure your TC004 to work with a Windows-based computer for screen projecting and imagery analysis. Getting Started 1. Download and install the TDView software Go to www.topdon.com/products/tc004, click “Download” to enter the download page.
Then download and install the TDView software to your computer. 2. Connect TC004 to your computer with the supplied USB cable (see Figure 4.1.1). EN I 10 Figure 4.1.1