Setup Disable log The TcEventLogger has a small log with 128 messages max. The TcEventlogger saves this log together with its configuration in the project storage. To disable this and switch to temporary log files you can set a value in the registry: HKLM\SYSTEM\CurrentControlSet\Services\TcEventLogger\LogToTcStg (REG_BINARY) - not there or value = 0x1 log in the storage - there and value = 0x0 disable log in the storage DCOM Security From TwinCAT 2.11. TcEventLogger implicitly sets default access rights. To set access rights explicitly via dcomcnfg or registry (e.g. for remote access) set the following value in the registry:
HKLM\SYSTEM\CurrentControlSet\Services\TcEventLogger\UseAppIdSecurity (REG_DWORD) Not existing OR value = 0 : implicit configuration of access rights Value >= 1 : configuration via Registry/ Dcomcnfg TcEventLogger 14 Version: 1.1