beckhoff TE132x — 6.1 TwinCAT 3 Bode Plot - first steps

Samples | TwinCAT 3 Bode Plot - first steps 6 Samples | Samples 6.1 TwinCAT 3 Bode Plot - first steps | TwinCAT 3 Bode Plot - first steps In order to enable you to get up and running quickly and to simplify work with the TwinCAT 3 Bode Plot, the first steps towards a Bode Plot recording are briefly summarized on this page. If you wish to create a Bode Plot for a TwinCAT CNC axis, note the instructions for configuring TwinCAT CNC axes [ } 38] at the end of the section. WARNING Risk of injury due to the drive axis starting up automatically To create the Bode Plot, the drive axis performs a motion sequence that depends on the settings.

At the start of the recording the drive axis starts up automatically in accordance with the set motion profile and can endanger people and material. During the recording the drive axis remains integrated in the application context (e.g. enables, monitoring, etc.). Ensure safety during the Bode Plot recording. For a basic understanding it is important to know that the TwinCAT 3 Bode Plot is part of the Measurement installation, which also includes the Scope View and the Scope Server. Some functions are used across Measurement installations. For example, the toolbar controls both Scope and Bode projects.

Since all Measurement projects use the Scope Server for the recording of the data, this is always installed as well. However, it can also be installed individually on a target device via the component installation. ь For the Bode Plot, the “Base” license is initially activated, irrespective of whether it has been installed via its own Measurement setup or via the TwinCAT 3 XAE setup. 1. Create a new project and select the preconfigured Bode Project from the available Measurement templates. TE132x 33 Version: 1.3.0