Samples | TwinCAT 3 Bode Plot - first steps 8. In the following window, you have the choice of which Bode elements you want to export and can configure basic settings for the CSV format. р You have now created a Bode Plot. Notes on the configuration of TwinCAT CNC axes If a Bode Plot recording is to be generated for a TwinCAT CNC axis, the matching speed standardization f must be set for that axis in the axis parameter set. Based on the AX5000’s internal speed scaling (1 increment corresponds to a speed of 5.588 Ч 10 ⁵ rpm), this is calculated using the following formula: With f: scaling factor [µm/min] or [10-3°/min] d: feed per motor revolution [µm/rev] or [10-3°/rev] i:
gear ratio [-] The resulting factor must then be entered in the axis parameter set for the respective axis. This is done by means of the parameters P-AXIS-00205 - P-AXIS-00207. Example: Linear axis with 5 mm feed per motor revolution and gear ratio 4. This results in the following axis parameters: TE132x 38 Version: 1.3.0