Beckhoff Automation GmbH & Co. KG TE1410 — 2.4.1.1 TC ADS Async Read

Up to version 1.1.xxxx.x | TE1410 Simulink Library Block parameters Code generation Code generation is supported only for the TwinCAT Target. TE1410 13 Version: 1.3.1 Block sample time The Simulink block sample time, which is the ADS request interval (refered to the Simulink time but not to the real time) Abort simulation on ADS error Stop simulation at the first ADS error Data type The data type of the Data output signal, which should be the data type of the transmitted ADS variable Data width The width of the Data output signal. Use values greater than 1 to transmit arrays.

ADS timeout Simulink will wait on a response of the last ADS request until this timespan is exceeded (in each time step) Direct feed through Evaluate the input values in the output method of the block. This ensures, that the values at the output ports in the current time step belong to the ADS parameters at the input ports of the same time step. Otherwise the output values belong to the input ADS parameters of the previous time step. Activating this option can significantly slow down the simulation. Create signal labels Signal labels are created for the signal lines, connected to the output ports