Up to version 1.1.xxxx.x | TE1410 Simulink Library Block input and output ports The number of ports and the data types of the ports depend on the block configuration. There are no fix input or output ports. Block parameters Module in-/outputs Create or open a TMI (TwinCAT module instance) file, containing the interface module configuration. This file can be imported to the TwinCAT project. TE1410 18 Version: 1.3.1 Target module NetId The NetId of the target system, where the interface module instance is running. OID The object ID of the module instance.
Module settings Module instance definition file Create or open a TMI (TwinCAT module instance) file, containing the interface module configuration. This file can be imported to the TwinCAT project. Default module sample time The default sample time of the interface module. General Simulink block settings Block sample time The Simulink block sample time, which is the ADS request interval (referred to the Simulink time but not to the real time) Synchronisation No synchronization / Synchronized data exchange The real time span from the start of the simulation is transmitted from the interface module to Simulink and can optionally be used to slow down the simulation time to the real time.
Provide TwinCAT time output port Provide the real time span from the start of the simulation as an output port.