TEPLODOM Download & Install Guide (EN)

Congratulations on your embroidery solution purchase! After installation and activation, please take time to review the manual (under "Help" in the software) to familiarize yourself with the functionality of the software. This guide provides important information for successful installation of your new software. Download & Install 1. Navigate to the software downloads page at https://downloads.berninacloud.com. 2. Select the first four characters of your Product Serial Number. This will direct you to the correct software download page . 3. Download the software from the download link. 4.

Locate the setup file (softwarename-versionnumber.exe) in the downloads folder of your computer, and double-click to begin the installation. 5. Click "next" as prompted by the installation process to complete the install. Software Activation (Not Needed for Sizer) 1. Click on the desktop icon to launch the software. 2. When the software opens, the software will need to be activated. 3. On the initial activation page that comes up when you launch the software, enter the following information: Product Serial Number - This number is found on the software card. Do not lose this number. Device Identification Number - This number will be generated by the software and entered for you.

Activation Code - If you are connected to the Internet, automatically obtain this number by clicking the “Activate” button. This is the fastest and easiest way to activate your software. If you are not connected to the Internet, follow the on screen instructions to obtain an activa- tion code through an alternative Internet-enabled device 4. If the Product Serial Number is for an upgrade, the Product Serial Number from a deactivated previ- ous version of software may be required to complete the activation. Rev 120922

Стр. 1