26 en Controls “Drink selection” rotary knob Power on/off switch O / I The power switch O / I (9) is used to switch the appliance on or to switch it off fully (power supply off). This rotary knob (14) is used to select the required drink and the per-cup quantity. It is also used to change user settings. a Important: Before switching off, run the cleaning programme or use the e off / j button (12) to switch off. Small Espresso Espresso Small Cafй Crиme Cafй Crиme Large Cafй Crиme b e off / j button When the e off / j button (12) is pressed briefl y, the appliance rinses and switches off.
Pressing and holding down the e off / j button (12) displays the user settings or starts the descaling and cleaning function. to c 2 small Espresso 2 Espresso 2 small Cafй Crиme 2 Cafй Crиme 2 large Cafй Crиme e Rinse machine f Rinse milk system to d h button Press the h button (11) to generate steam for preparing milk froth. start button Press the start button (10) to begin drink preparation or to start a service programme. Press the start button (10) again during drink preparation to cut the dispensing process short. N.B.: If a drink is selected that cannot be prepared, Invalid combination appears in the display. Change the coffee strength or the selected drink.
“Coffee strength” rotary knob Milk frother Pull the milk frother (6) out to open it and push it back in to close it. This rotary knob (13) is used to set the coffee strength. h Very mild Mild Mild + Normal Normal + Strong to g Robert Bosch Hausgerдte GmbH TES55236RU.indb 26 04.06.2013 14:35:44