en 17 Dispensing hot water Maintenance and daily cleaning Ў Risk of burns! The milk frother 10 gets very hot. After use, allow to cool down fi rst before touching. Ў Danger of electric shock! Unplug the appliance before cleaning it. Never submerse the appliance in water. Do not use a steam cleaner. The appliance must be ready for use. ●Place the pre-warmed cup or glass under the outlet of the milk frother 10 . ●Select the required setting for Hot water К by turning the rotary knob 6 . ●Press the start button 8 . ●Wipe the outside of the appliance with a soft, damp cloth. ●Do not use any cleaning agents that contain alcohol or spirits. ●Do not use abrasive cloths or cleaning agents.
Please remove suction hose start ●Remove the milk suction hose 10c and press the start button 8 . Hot water runs out of the milk frother outlet 10 . Press the start button 8 again to cut the process short. Note: It is possible to set the temperature of the hot water (see “Menu settings”). ●Always remove any limescale, coffee, milk, cleaning or descaling fl uid residue immediately. Such residue can cause cor- rosion. New sponge cloths may contain salts. Salts can cause rust fi lm on stain- less steel and must therefore be washed out thoroughly before use. ●Pull the drip tray 23 with the coffee grounds container 23c forwards and out. Remove the panel 23a and grate 23b .
Empty and clean the drip tray and coffee grounds container. K Do not put the following items in the dishwasher : Panel of drip tray 23a , powder compartment 18 , brewing unit 20 , water tank 11 , Aroma cover 16 and stainless steel milk container. J The following parts may be cleaned in the dishwasher: Drip tray 23 , grate 23b , coffee grounds container 23c , measuring spoon 14 and the individual parts of the milk container cover. TES80.. | 04/2013 TES803_805_807_1RW.indb 17 08.05.2013 14:53:00