Department of Defense MIL-STD-1311C — MIL-STD-1311C Test Methods for Electron Tubes – DoD Standard PDF

Downloaded from https://www.everyspec.com MIL-STD-1311C 31 January 2001 METHOD 1366A INTERELEMENT LEAKAGE RESISTANCE, COLD 1. Purpose. The purpose of this test is to measure interelement leakage resistance. 2. Procedure. When using the circuitry shown on figure 1366-1, the resistance (for example, R = V/I) between the specified elements should be greater than the limit specified. All other unused elements shall be disconnected. Voltage (V, and its polarity) on the elements under test shall be as specified on the TSS. NOTE: Other instrumentation producing equipment results may be used. FIGURE 1366-1. Test circuit for interelement leakage resistance cold. METHOD 1366A 1366-1 28 March 1975