Department of Defense MIL-STD-1311C — MIL-STD-1311C Test Methods for Electron Tubes – DoD Standard PDF

Downloaded from https://www.everyspec.com MIL-STD-1311C 31 January 2001 METHOD 3247 DC ANODE VOLTAGE FOR CONDUCTION 1. Procedure. The dc anode voltage test shall be performed in the same circuit as the operation test of method 3246 and within 60 seconds following the conclusion of the operation test. Under the conditions specified, the anode voltage shall be increased until the tube starts to conduct current. The dc anode voltage required shall be within the limit(s) specified on the TSS. METHOD 3247 19 April 1968 3247-1