PLC API Inputs/ outputs VAR_IN_OUT stParams : ST_CTRL_CHECK_IF_IN_BAND_PARAMS; END_VAR stParams consists of the following elements: TYPE ST_CTRL_CHECK_IF_IN_BAND_PARAMS: STRUCT tCtrlCycleTime : TIME := T#0ms; tTaskCycleTime : TIME := T#0ms; fMin : FLOAT; fMax : FLOAT; END_STRUCT END_TYPE 4.2.1.6.2 FB_CTRL_LOG_DATA This function block allows a log file to be created in *.csv format (comma separated values), in which a maximum of 10 variables may be recorded. The column headings specified by the user are written in the first row of this file. The input data is written at equal time intervals in the following lines. The individual entries are separated by a comma.
The time interval between the entries is specified in the tLogCycleTime parameter. If, for instance, tLogCycleTime := T\#2s is chosen, then an entry is made in the file every 2s. The files that were generated can be analyzed with a spreadsheet program, for example. TF4100 124 Version: 2.2.4 Name Type Description bInBand BOOL A TRUE at this output indicates that the input value is within the specified range. bNotInBand BOOL A TRUE at this output indicates that the input value is not within the specified range. eErrorId E CTRL ERROR _ _ CODES Supplies the error number [} 173] when the output bError is set. bError BOOL Becomes TRUE, as soon as an error occurs.
Name Type Description stParams ST CTRL _ _ CHECK IF IN _ _ _ BAND PARAMS _ Parameter structure of the function block Name Type Description tCtrlCycleTime TIME Cycle time with which the control loop is processed. This must be greater than or equal to the TaskCycleTime. The function block uses this input value to calculate internally whether the state and the output values have to be updated in the current cycle. tTaskCycleTime TIME Cycle time with which the function block is called. If the function block is called in every cycle this corresponds to the task cycle time of the calling task. fMin FLOAT Lower limit of the range fMax FLOAT Upper limit of the range