beckhoff TF4100 — 4.2.1.3.4 FB_CTRL_3POINT_EXT

PLC API Outputs VAR_OUTPUT fOut : FLOAT; eState : E_CTRL_STATE; eErrorId : E_CTRL_ERRORCODES; bError : BOOL; END_VAR Inputs/ outputs VAR_IN_OUT stParams : ST_CTRL_3POINT_EXT_PARAMS; END_VAR stParams consists of the following elements: TYPE ST_CTRL_3POINT_EXT_PARAMS : STRUCT tCtrlCycleTime : TIME := T#0ms; tTaskCycleTime : TIME := T#0ms; fOutOff : FLOAT; fOutOn : FLOAT; fGain : FLOAT; fOffset : FLOAT; END_STRUCT END_TYPE TF4100 49 Version: 2.2.4 Name Type Description fOut FLOAT Output of the extended 3-point element eState E CTRL STATE _ _ State of the function block eErrorId E CTRL ERROR _ _ CODES Supplies the error number [} 173] when the output bError is set.

bError BOOL Becomes TRUE, as soon as an error occurs. Name Type Description stParams ST CTRL _ _ 3POINT EXT _ _ PARAMS Parameter structure of the extended 3-point element Name Type Description tCtrlCycleTime TIME Cycle time with which the control loop is processed. This must be greater than or equal to the TaskCycleTime. The function block uses this input value to calculate internally whether the state and the output values have to be updated in the current cycle. tTaskCycle Time TIME Cycle time with which the function block is called. If the function block is called in every cycle this corresponds to the task cycle time of the calling task.

fOutOff FLOAT If the control deviation falls below this value, the output is switched off (set to zero). fOutOn FLOAT If the control deviation exceeds this value, the output is switched on. fGain FLOAT Gain factor fOffset FLOAT Offset