Тексел ТХ01-RS — 4.1 Housing Н

4 Installation 4.1 Housing Н To connect Device: 1. Fasten the bracket with three M4 Ч 20 screws on the surface intended for mounting (see Figure 4.2 ). NOTICE Screws for the bracket mounting are not included. 2. Hook the fixing bracket from the back panel of Device to the upper edge of the wall bracket. 3. Attach Device to the bracket with the supplied screw. Demount Device in the reverse order. NOTICE Remove the cover before wiring. Fasten the base of Device to the bracket with a supplied screw. Figure 4.1 – Wall-mounting of the Device 14