Attaching/Adjusting the Paper Ejection Tray If you attach the paper ejection tray, you can temporarily store the printed paper in the tray. Follow the steps below to install/adjust the ejection tray. • Paper may not stay in the paper ejection tray depending on the paper curl and length. • When the fanfold paper is used, the several printed papers can be stored in the ejection tray. See Paper Ejection Tray on page 54 for the numbers of the fanfold paper that can be stored in the ejection tray. 1 Attach the paper ejection tray to the hooks under the paper ejection table. 2 Pull the lever at the bottom-right of the paper ejection tray to unlock it.
3 Slide the bottom tray to align it with the paper length. 100