Ethernet Model Case 3: Connect one printer to two client computers. Client Computer-1 Printer-1 Install Package-1 Favorite User Definition A MediaA IP Address-1 Client Computer-2 Printer setting file A Printer setting A Preparation: Install the Install Assistant, the Printer Setting, and the printer driver on the administrator’s computer, and follow the steps below. (1) Make the printer driver setting. (Set MediaA in the “Favorite Setting” list.) (2) Create the BSF file. (Driver setting.BSF) (3) Import the driver setting file “. BSF” with the Install Assistant, set the printer IP Address-1, and create the install package.
(4) Create the setting file of the printer (Printer setting file A) with the Printer Setting. Distribution: (1) Prepare the client computers, the printer, and the administrator’s computer for network communication (possible to use also as a client computer). (2) Connect the printer to the network. (3) Set IP Address-1 to the printer using the EpsonNet Config on the administrator’s computer. (4) Copy the install package on Client Computer-1, and double click its icon. The printer driver is automatically installed and set. (5) Copy the install package on Client Computer-2, and double click its icon. The printer driver is automatically installed and set.
(6) Make the settings to Printer-1 with the Printer Setting on the administrator’s computer using the printer setting file A. 222 Driver Favorite User Definition A Favorite User Definition A Printer settin g A IP Address-1 Driver Favorite User Definition A Favorite User Definition A