Chapter 1 Product Overview 1 • Do not use the paper with a hole or cutout. • when using this type of paper, the label end and the black mark end of the black mark position on the die-cut label must be matched.
41 Paper type Plain Media Form Roll paper Backing paper width 30 to 112 mm {1.18 to 4.41"} Label width 25.4 to 108 mm {1 to 4.25"} Label length When removing all the fringes 25.4 to 1117.6 mm {1.0 to 44.0"} When removing right and left fringes only 15 to 1117.6 mm {0.59 to 44.0"} Gap between labels 3 to 6 mm {0.12 to 0.24"} Edge cutoff on left/right side 2 ± 0.5 mm {0.079 ± 0.02"} Edge cutoff width 1.5 mm {0.059"} or more Label edge R 2 mm {0.079"} or less Black mark width 13 mm {0.51"} or more Black mark length 5 mm {0.19"} or more Black mark centering position 8.5 ± 1 mm {0.33 ± 0.039"} Black mark interval 15 to 1117.6 mm {0.59 to 44"} Paper thickness 0.128 mm {0.005"} Roll paper core Outside diameter:
44.1 mm {1.74"} External diameter Maximum 101.6 mm {4.0"} Winding direction Printing face must be facing outside.