Chapter 2 Setup Installing the Driver The following two methods can be selected when installing the printer driver. • Installation using Easy setup: Described in this manual. • Installation from the printer driver file: Not described in this manual. Execute the installer of the printer driver, and follow the instructions on the screen to install the printer driver. For Ethernet model whose network setting has not changed from the factory default value, make such settings as the IP address using the EpsonNet Config, to enable the IP communication. Installation using Easy setup 2 [Easy setup] makes it easy to install the printer driver and set the network (for Ethernet model).
• Make sure to logon as an administrator to install the printer driver. • More than one printer cannot be set up by [easy setup]. Use [EPSONNetConfig] for setting up more than one printer on the network. • For information on how to use the printer driver, see How to Use the Printer Driver on page 154. Installation procedure is different between USB Model and Ethernet Model. • For USB Model (see page 71 ) • For Ethernet Model (see page 73 ) For USB Model Follow the steps below to install the printer driver. 1 Double-click the icon for Easy Setup “EPSetup.exe”. 71