Loading/Replacing Fanfold Paper Follow the steps below to load the fanfold paper. • Loading the paper for the first time: 2 to 5 • Using the paper completely (loads same type of paper): 1, 5 • Changing paper type or classification: 1 to 5 1. Removing the paper (page 91) 2. Setting for media position detection (page 93) 3. Attaching the paper feed guide (page 94) 4. Adjusting paper ejection guide/fanfold paper guide (page 96) 5. Loading the fanfold paper and turning on the printer (page 98) Make sure that the DIP switch 3 (paper selection) setting is ON (fanfold paper) before loading or replacing the fanfold paper. See Setting the DIP Switches on page 78 for DIP switches settings. 90