Notification Settings Sets following notification setting. Beep Notification Setting at an Error Selects beep notification (sounds buzzer or not) when error occurs. (Default setting is [Beep]. The user does not need to change when using with default setting.) LED Notification Setting at Ink Low Selects LED notification (lights LED or not) when ink level is low. (Default setting is [LED On] . The user does not need to change when using with default setting.) Notification Setting at a Paper Size/Type Error Selects notification setting at a paper size or type error. Lights Error LED and Paper LED when detecting an error, and notifies error if EPSON Status Monitor 3 is in active.
(Default setting is [No Error Notification]. The user does not need to change when using with default setting.) Follow the steps below to set the notification setting. 1 Turn the printer on. 2 Display the printer driver window. (See How to Use the Printer Driver on page 153 for how to display the driver window.) 3 Select [Maintenance And Utilities] tab and click [Notification Settings]. 4 The [Notification Settings] window is displayed. Select an item to set and click [Next]. 106