Module: Sets the thin element width in dots. - : Not supported *1 : The values for the Rotation Settings in the table are those when [ Orientation ] in [ Page Layout ] tab is se to “ Portrait .” When it is set to “ Landscape ,” the description is changed as below. "Normal, Rotate 180 Degrees": “Rotate 90 Degrees, Rotate 270 Degrees" "Rotate 90 Degrees, Rotate 270 Degrees": "Normal, Rotate 180 Degrees" 162 Symbol Category Print Quality Rotation Settings (*1) Adjust Bar Width Upper Line: Minimum Module [by 360 dpi] Lower Line:
Minimum Ele- ment Ratio ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher UPC-A UPC-E JAN13(EAN) Plain Media, Plain Media Label Speed Normal, Rotate 180 Avail- able 4 dot 2.5 - - JAN8(EAN) Code39 ITF Rotate 90, Rotate 270 6 dot 2.5 - - Codabar Code93 Code128 Quality Normal, Rotate 180 4 dot 2.5 - - GS1-128M GS1-128 Rotate 90, Rotate 270 6 dot 2.5 - - GS1 DataBar Omnidirec- tional Fine Media, Fine Media Label, Synthetic Media Label, PET Film Speed Normal, Rotate 180 3 dot 2.5 4 dot 2.5 GS1 DataBar Truncated Rotate 90, Rotate 270 6 dot 2.5 (*2) - (*2) - GS1 DataBar ExpandedM Quality Normal, Rotate 180 3 dot 2.5 4 dot 2.5 GS1 DataBar Expanded GS1 DataBar Limited Rotate 90, Rotate 270 6 dot 2.5 (*2) - (*2) -