For Ethernet Model Connect the printer to a network by a LAN cable via a hub. When LAN cables are installed outdoors, make sure devices without proper surge protection are cushioned by being connected through devices that do have surge protection. Otherwise, the devices can be damaged by lightning. Never attempt to connect the standard telephone line cable to the 10/100BASE-T Ethernet connector. CAUTION 1 Open the connector cover on the rear of the printer. 2 Connect a LAN cable to the Ethernet connector by pressing firmly until the connector clicks into place and arrange it as shown below.
Make sure to put the USB cable through the cable hook as shown in the figure below to pre- vent the cable from coming unplugged. Cable hook: Prevents cable from coming unplugged. 3 Close the connector cover. 66