5 Enter ID and password to the login screen, login to the EpsonNet Config. ID: epson Password: epson 6 When EpsonNet Config screen appears, the preparation is complete. Loading/Replacing the Roll Paper Follow the steps below to load the roll paper. • Loading the paper for the first time: 2 to 5 • Using up the paper completely (loads same type of paper): 1, 5 • Changing paper type or classification: 1 to 5 1. Removing the paper (page 39) 2. Setting for media detection (page 41) 3. Removing the paper feed guide (page 43) 4. Adjusting roll paper guide/paper ejection guide (page 44) 5.
Loading the paper and turning on the printer (page 47) Before loading or replacing the roll paper, make sure that the DIP switch 3 (paper selection) setting is OFF (roll paper). See "Setting the DIP Switches" on page 33 for DIP switches settings. 38