E 3. Slide the bottom tray to align it with the paper length, and lock it. Cleaning the Autocutter Adhesive from labels may stick to the fixed blade of the autocutter, which may prevent the autocutter from cutting paper cleanly. If this happens, follow the steps below to clean the autocutter. 1. Turn off the product and disconnect the power plug from the wall outlet. 2. Open the roll paper cover to remove the paper. 3. Remove the adhesive on the autocutter blade with an implement such as a cotton swab. If necessary, moisten the cotton swab with alcohol. CAUTION: Do not touch the fixed blade of the autocutter with bare hands. Doing so may cause injury. TM-C3400Z User’s Manual 29 Fixed bla de