Die-cut Labels (Black Marks) and Roll Paper When Borderless Printing Enabled Margins at top, bottom, right, and left (inside label): 0 mm (typical value) Backing paper width Paper width center Paper feed direction Auto cut position Perforation position Auto cut position *1: When not auto cutting, 8.0 mm or more *2: When not auto cutting, 11.0 mm or more Auto cut position Print area Waste part 2.0 mm Label Backing paper Black mark position (back side) 71 on on ion ion art m Print area width 0.5 to 1.0 1.5 mm 15.0 mm or more*1 mm 1.5 *1: Wh 8.0 *2: Wh 11. mm 1.5 Waste part 2.0 mm Print area width Q Note The maximum value of the print area width is 104 mm.