Paper Handling to Prevent Unprinted Labels If using die-cut or continuous paper (black marks), the first label of paper may not be printed when fed or printable label may still remain when paper out is detected. This section explains paper handling and setting to prevent such types of paper from causing these problems. Printing from the First Label at Paper Loading As this printer can detect the leading edge of a page, fixed-quantity feeding is performed after the paper is loaded. As a result, it may not be possible to print the first sheet of labels. This section describes the paper loading methods and paper handling in order to prevent this problem and print from the first labels.
Loading Paper When loading paper, check that the leading edge of roll paper is between the auto cut position and leading edge of the discharge table, and then close the roll paper cover. Auto cut position Paper leading edge position area Leading edge of roll paper cover Paper leading edge position 84