Chapter 3 Handling Cut Position Adjustment The paper feed pitch is adjusted as described below depending on the [Media detection settings]. 3 127 Media detection settings Description Die-cut label (Gap) Transparent die-cut label • Specifying a positive value moves the cut position closer to the reference position (print start position). • Specifying a negative value moves the cut position away from the reference position (print start position). Backing paper Label Print reference (Print start position) Print result Cut position Label Die-cut label (Blackmark) • Specifying a positive value moves the cut position closer to the reference position (print start position).
• Specifying a negative value moves the cut position away from the reference position (print start position). Backing paper Label Print reference (Print start position) Print result Cut position Label