138 Trouble Description Recovery method Image/ Illustra- tion Print results are blurry Print results may be blurry depending on the thickness of the paper being used. Adjust the misalignment of bidirectional printing. On the [Printer Utilities] tab, select [Printer Setting Utility]. When the PrinterSetting screen is displayed, click [Printer Adjust- ment] - [Print Head Alignment] - [Bi-direc- tional Printing Adjustment]. See "Print Head Alignment" on page 133. - Left and right sides of the print result are blurry. The shutters on the platen on the outer side of the paper are set to open.
When the shutters on the platen on the outer side of the paper are set to open, air current may cause printing trouble; outer edges of the print result may become blurry. Follow the instructions on the label on the top of the printer, and set the shutters on the platen. See "Shutter Adjustment" on page 40. No. 4 The print result is mis- aligned laterally. Paper is not loaded in the center. If the paper is loaded out of the central position, print results may be misaligned laterally right after the media is loaded. Use the media guide to load the paper in the central position, or feed the paper first and then start printing. - The paper is close to the rear edge.
When the paper is close to the rear edge, the print results may be misaligned later- ally or become blurred. Replace the paper. -