Chapter 3 Handling Fanfold Paper The following media is supported: • Continuous paper (Blackmark) • Die-cut label (Blackmark) Method for arranging the media • Continuous paper (Blackmark) Place the edge of the first black mark in a position 25 mm {0.98”} or more from the edge of the paper, and do not place a black mark before there. • Die-cut label (Blackmark) Place the edge of the first label in a position 25 mm {0.98”} or more from the edge of the paper, and do not place a label or black mark before there, leaving only the backing. 3 Black mark position Paper feed direction 25 mm {0.98” } or more 161 Black mark position Paper feed direction 25 mm {0.98” } or more