Setting the Printer You can set the following items before charging ink in the printer: • Media source settings • Media detection settings • Network settings such as IP address You can set the media settings and IP address settings which are minimally necessary to use a printer before ink charging. This reduces operations at the installation location, contributing to reduction in required time and efficiency improvement for installation operation. You can also avoid troubles caused by moving the printer after ink charging. Have the following printer setting list beforehand: • Media source settings • Media detection settings • Network settings Charge ink (Approx.
10 minutes) Other settings on the administrator's computer/client computer Complete Setup after ink charging Set the items listed below after ink charging. For details on the settings after ink charging, see "Changing the Printer Settings" on page 183 . • Printer operation settings • Notification settings • Panel button settings • Operating time settings • Paper feed adjustment 178 Printer Setting procedure Local Printer Using TM-C3500 Printer Driver on each client computer Network Printer Using EPSON Monitoring Tool