• Do not use the paper with a hole or cutout. • For the black mark position of the die-cut label paper, match the label edge to the black mark edge. • You can use paper with all fringes removed or paper with fringes on the left and right removed.
202 Media type Plain label / Matte label / Glossy label Media source Roll paper Backing paper width 30 to 112 mm {1.18 to 4.41"} Label width 25.4 to 108 mm {1 to 4.25"} Label length 8 to 1,117.6 mm {0.32 to 44"} Gap between labels 3 to 6 mm {0.12 to 0.24"} Left and right outer edges 2 mm ± 0.5 mm {0.079 ± 0.02"} Edge cutoff width 1.5 mm or more Label edge R 1.5 mm {0.059"} or less Width of a black mark 13 mm {0.51"} or more Length of a black mark 4 mm {0.16"} or more (with a width of at least 4 mm around) Center of a black mark 8.5 mm ± 1 mm {0.33 ± 0.039"} Gaps between black marks 11 to 1,123.6 mm {0.43 to 44.24"} Paper thickness Plain label / Matte label:
0.129 to 0.143 mm {0.005 to 0.006"} Glossy label: 0.184 mm {0.007"} Paper core Plain label: outer diameter 44.1 mm {1.74"} or more Matte label / Glossy label: outer diameter 56.8 mm {2.24"} or more External diameter Maximum 101.6 mm {4"} Winding direction Printing face must be facing outside. Form of perforated line Plain media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut Fine media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut PET film : 0.6 mm uncut, 8.4 mm cut