Beeper When an error occurs while “Beep Notification Setting at an Error” is enabled, the beeper performs “Sound the beeper on an error” shown in the below table. The beeper continues to beep until all the causes of error are removed. When "Settings For Paper Handling After Print" - "Notification" is enabled, the printer performs “Beeper sound when the printer is not in an error state” shown in the below table. ❏ Frequency: Fixed to approximately 2.5 kHz ❏ Volume control: 2 levels on the hardware • The volume can be set using the DIP switch. See "Setting the DIP Switches" on page 47. • When the paper is in “Paper out” status, which is without printing data, the beeper does not sound.
22 Sounding period Silent period Number of the pattern repeated Overall time Number of times repeated Printer event 500ms 300ms 3 5 seconds Until the error factor is removed. Sound the beeper on an error • Service required • Printer error • Roll paper cover open • Ink cartridge cover open • Replace ink cartridge • No ink cartridge • Ink cartridge read error • Maintenance box cover open • Replace maintenance box • No maintenance box • Maintenance box read error • Media form error • Media size error • Paper jam error • Paper removal error • Paper out error 300ms - None - 1 Beeper sound when the printer is not in an error state • Every page • The final page only