Chapter 6 Appendix When “Borderless Printing“ is enabled Top, bottom, left. right margins: 0 mm (Typical value) 6 Blackmark position (back) • Do not print inside or within 2 mm {0.08"} around the snap button mounting hole to prevent damage to the mechanical functions. • If using the WB-S/M/L series, use the attachment (OT-WA34). • If you enabled "Borderless Printing”, printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the paper/label. To make sure printing does not protrude out, ensure mar- gins of 1.5 mm {0.06"} or more in the print data.
221 mm 81.5 mm 184.2 11.0 mm mm 72.5 15.0 mm mm 30.2 36 mm Paper feeding direction Center of paper widt mm 7.9 5.5 mm Autocutting posit mm mm 70.4 157.2 Recommended pri barcodes (*dimensio mm 105.9 mm 14.6 Autocutting po 72.5 mm 30.2 mm 81.5 mm 157.2 mm 70.4 mm 14.6 mm 105.9 mm 11.0 mm 15.0 mm Print area mm Paper .4