Chapter 6 Appendix When “Borderless Printing“ is enabled Top, bottom, left. right margins: 0 mm (Typical value) Paper width Autocutting position Recommended print area for text and 6 • Do not print inside or within 2 mm {0.08"} around the snap button mounting hole to prevent damage to the mechanical functions. • If using the WB-S/M/L series, use the attachment (OT-WA34). • If you enabled "Borderless Printing”, printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the label. To make sure printing does not protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data.
223 36 mm Center of paper w mm Paper feeding 10.8 5.5 mm 292.1 mm 156.5 mm 105.0 mm 30.6 mm 265.0 mm 142.4 mm 11.0 mm 15.0 mm