Attaching the Power Switch Cover Attaching the power switch cover prevents accidental pressing of the power switch. Before attaching the power switch cover, set DIP switch 1 to ON. (For details, see “Setting the DIP switches” Setting the DIP Switches on page 47 .) The printer power can then be switched by turning the AC supply on and off, and you can also control the printer power with a device such as a distribution board. In this case, the power switch is used to reset the printer. To prevent the power switch from being pressed Attach the power switch cover as it is (without punching a hole in it). 1 Set DIP switch 1 to ON.
2 Push the power switch cover onto the power switch of the printer. 32