Chapter 4 Handling - : Not supported * : Bars of the printed barcode may be thickened since ink soaks into the paper. It is recommended to check [ Adjust Bar Width ]. When “Module” is set to an odd number and the resolution is changed by changing [Print Resolu- tion], the printed barcode size may be changed. The barcode size can be checked by using the [Size Display] button. 4 • Bar Height: Sets the element height with dots. Specified dots indicate the actual print size. • Adjust Bar Width: Narrows the element width when printing. Make sure to select it only when the barcode is not clear enough to be read. • HRI Character Position: Select the position of the HRI characters.
Select [ Do Not Print ] when not desired. The printing position is limited for some types. • HRI Font: Select the HRI character font size. • Element Ratio: Sets the thick element width by the ratio to the thin element width. • Character Spacing: Sets the character spacing (interval) by the ratio to the thin element width. 2 Click [ Add ]. The selected barcode font is saved and the font name is added to the font list. 71 Category Graphic resolution (dpi) Rotation Settings Adjust Bar Width* Upper Line:
Minimum Module [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher Light matte coated 360 180 Normal, Rotate180 Available 4 dots - - Rotate90, Rotate270 6 dots - - 360 360 Normal, Rotate180 4 dots - - Rotate90, Rotate270 6 dots - - 720 360 Rotate90, Rotate270 4 dots - - 6 dots - -