Chapter 1 Product Overview Rear Side USB Connector Dip Switch Cover Ethernet Connector Wire Saddle Dip Switch Dip Switch Cover mounting screw AC Inlet 1 Air Vent When setting the Power button operation to “Power switch disabled (Reset operation)”, make sure the printer is not operating when turning the power OFF. 21 Name Description USB Connector For connecting a USB cable. Ethernet Connector For connecting a LAN cable. Wire Saddle Pass the USB cable through this saddle to prevent disconnection of the USB cable. AC Inlet For connecting a power cable. Air Vent Exhausts heat generated in the product to prevent an internal temperature rise.
Allow a clearance of 10 cm {3.94”} or more from the air vent to ensure ventilation when installing the product. Dip Switch Cover mounting screw Remove the screw to open the Dip Switch Cover. Dip Switch Used when changing the function of the Power button. Dip Switch Cover When operating the Dip Switch, remove the Dip Switch Cover Mounting Screw and open the cover.