English Purpose of This Manual This manual provides information to operators of the TM-J7000/J7100 and TM- J7500/J7600 printers to describe basic operations to enable safe and correct use of the printer. Unpacking The following items are included for the standard specification printer. If any item is damaged, contact your dealer. ❏ Printer ❏ Roll paper ❏ Ink cartridge ❏ Power switch cover ❏ Fixing plate for AC adapter and screws (only for the TM-J7500/J7600) ❏ Instruction sheet Peel away the 3 pieces of tape on the printer and remove the spacer from the slip paper path after unpacking. Control Panel (LEDs and Buttons) See illustration B.
LEDs POWER Lights when the power is on and is off when the power is off; flashes during cleaning and other operations such as power-on and power-off. Note: Never open the printer cover or turn off the printer when the POWER LED is flashing. ERROR Lights when the printer is offline (when the ink cartridge is removed because it is time to replace the ink cartridge, the roll paper is at the end, or the printer cover is open.) Off when the printer is online. Flashes when an error occurs. (See the Troubleshooting section.) INK Lights when the ink cartridge is not installed or it is time to replace the ink cartridge. Off when the ink cartridge is installed and ink is adequate.
Flashes when the ink is low. The TM-J7100 and TM-J7600 have two INK LEDs, one for the color cartridge and one for the black cartridge. Note: To insure print quality, some ink remains in the cartridge after the INK LED comes on. CUT SHEET Lights when cut sheet (slip, check) is selected as print sheet. Off when roll paper is selected as print sheet. Flashes when the printer is in the cut sheet insertion or removal waiting state. PAPER OUT Lights when roll paper is out or nearly out. 4 TM-J7000/J7100 – TM-J7500/J7600 User’s Manual